OSEPP 101 Robotic Basic Starter Kit

Description

This has to be one of the ‘coolest’ looking kits in the Arduino market. Custom designed aluminum chassis with a nice protective black coat that prevents the surface from scratching and oxidizing. The strategically placed holes on the chassis allows you to easily attach more sensors or other devices to the frame for more functions.

Kit comes with everything you need to make your own autonomously operating robot. Not only that, it is smart enough to ‘chase’ after the brightest light in the room. With this function, you can use a flash light as your remote! If you prefer using an IR remote, that works too.

The included lessons that teaches you how to use two IR Detectors to give the robot object avoidance ability. The booklet that comes with this kit is close to 100 pages thick! Lots of great info, lessons, and codes. No prior electronic knowledge required.

Motors

• Understanding the H Bridge
• Understanding PWM
• Understanding the Motor Driver
• Motor Driver
• Random Turns

Infrared

• Understanding infrared
• Understanding the IR follower
• Serial Follower
• Understanding the IR Remote
• Serial Remote
• Remote LED Toggle
• Remote LED Repeat

Putting it all together

• Robot Follower
• Robot Remote
• Robot Complete

Includes 
1 x Uno R3
1 x L298N Motor Driver
1 x IR Follower
1 x IR Receiver
2 x IR Detector
1 x Top Chassis Frame
1 x Bottom Chassis Frame
Ball Caster Wheel Set
2 x Motor Mount Set
2 x Motor Assembly Set
Standoffs 3 cm x 8 / Standoffs 1cm
2 x Wheel
20 x Screw B 6 mm (main board screws)
Battery Holder Screw Set
14 x Nuts(for motor & battery holder)
2 x Jumper wire 16 cm (for motor driver to a Uno ISP)
1 x Mini USB Cable
6 x F/F Jumper 10cm (for IR Detector/Receiver)
1 x Screw Cap x 2 Wire1
20 x M/F Ribbon Jumper Wires 10cm
1 x Remote Control
1 x ON/OFF Switch with screw
20 x Screw A 6 mm (for chassis frame)
4 x Plastic Washer (between UNO & standoffs)