OSEPP 101 Arduino Basics Starter Kit

Description

Master the basics and discover the fun of building things from scratch with the 101 Arduino Basics Starter Kit. This excellent starter kit serves as a great starting point to the wonderful world of Arduino electronics. It offers step-by-step instructions with diagrams and a large number of parts to get you started on projects like Volt meter, LED game, and more. It also includes an UNO R3 Plus board, which is the basic starter model and a 6' USB type A to Mini-B cable.

Includes:

1 - OSEPP UNO R3 Plus
1 - 6' USB type A to mini-B
2 - Tact push switch 6mm x 6mm – through hole
1 - DIP switch 4 position – through hole
1 - 1Kohm potentiometer (variable resistor) – long pins
1 - 10Kohm potentiometer (variable resistor) – long pins
20 - 330 ohm axial resistor, 1/2W, 5%
5 - 1 kohm axial resistor, 1/2W, 5%
5 - 10kohm axial resistor, 1/2W, 5%
10 - LED through hole, 8.7mm height, ~2V drop, ~10-20mA (2 ea. red, yellow, green, white, blue)
2 - Two digits 7-segment LED – RED
1 - Buzzer, 5Vo-p
2 - NPN transistor v
1 - Breadboard – 30 columns x 14 rows (include 2 VCC and 2 GND)
40 - Ribbon jumper cables
1 - 9V battery connector
2 - Double side tape (2cm x 2cm x 3mm)
1 - Information sheet – Arduino UNO diagram + basic electronic theory
1 - Kit container

Resources

• WARNING: This product can expose you to chemicals including DINP which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.