NOVA Neptune Direct Drive Benchtop Lathe, 15", 110/220V

Description

This 1.5 HP lathe has an intelligent direct-drive digital motor from Straitech and an easy-to-use software-driven controller that provides smooth performance, intelligent control, and power under load. This floor version includes a heavy-duty floor stand and 15” over bed swing with 18” between centers. Speed can be adjusted from 100 - 4,000 rpm with no sacrifice in torque. Please note that operating under 100 rpm is not recommended for turning and should be for drying or sanding only. The 360° swiveling headstock locks at any position and includes locating pin detents at 0°, 22.5°, 45°, 90°, and 180°. The 4″ tailstock is self-ejecting. The bed has CAD designed webbing to absorb vibration throughout the bed length and provide exceptional structural strength. The motor also monitors motor conditions, providing the right power to maintain the speed set when varying loads are applied to the workpiece. As the cutting force varies, the computer only draws enough power to meet the conditions and maintain speed, saving up to 80% in power consumption.

• 1-1/4" 8 TPI lathe spindle
• 4 customizable speed settings
• 2 speed ramp settings
• Electronic braking
• Manufacturer's 10-year warranty on digital motor
• Manufacturer's 5-year warranty on electronic and mechanical

Input Voltage: 110/220V
Input Current 10A/14A
Motor Type: DVR Direct Drive Smart Motor
Motor Speed Range: 50 - 4,000 RPM
Motor Power: 1.5 HP
Tool Rest: 9" x 1" dia.
Tailstock Quill Taper: Morse Taper #2
Tailstock Quill Travel: 3.9"
Hole Through Tailstock: 2/5"
Spindle Thread: 1-1/4" x 8 TPI
Headstock Spindle Taper: MT2
Headstock Swivel: 360° with detents at: -45°, -22.5°, 0°, 22.5°, 45°, 90°, 180°
Spindle Indexing: 24 divisions (15° apart)
Swing Over Bed: 15"
Distance Between Centers: 18"
Overall size: 33"W x 16.7"D x 15"H
Weight: 125 lbs.

Includes
knock-out bar
9" tool rest
live center
2MT Spur Center
3" face plate
USB A-A cable
Allen keys

Please specify voltage. 110V will be shipped if not specified.

Resources