Micro Jig
Designed to be an affordable alternative that will dramatically increase your table saw safety. Simple to use design makes it easier then ever to achieve optimal safety on the table saw.
The precision drill-guide system for the MJ Splitter makes installation a breeze. The drill template lines up your drill perpendicular to the table saw surface and you can effortlessly drill straight lines into your Zero Clearance Insert (ZCI). The drill-guide's design lines up your splitter to plug directly into your ZCI for quick and accurate alignment with your saw blade.
Simple, exact, and extremely effective, cutting results are precise and virtually burn free. Each side of the splitter is offset by several thousands of an inch to give the perfect tolerance and pressure according to your cutting situation. Just flip the MJ Splitter around with the “plus” signs facing the fence to give your splitter the correct offset. Each "+" sign represent 0.003"; so "+++" equals 0.009".
MJ Splitter system is intended for everyday use on the saw. However, for more intricate operations such as bevel cuts, dado cuts, and other cuts where the MJ Splitter may interfere, simply remove it. When you’re ready to make a 90° cut, just plug the MJ Splitter back in; it’s just that simple. The pre-drilled splitter holes in your ZCI are aligned with your table saw, so no matter how many times you take the splitters out or put them back in the MJ Splitter performs as designed—perfectly aligned, every time.
Thin Kerf MJ Splitters (Yellow) are specifically designed to be used with Thin Kerf saw blades. For kerf ranges between 0.090" to 0.118".
Includes 5/32" drill bit, four #8 x 1/2" wood screws, drill guide & 2 MJ splitters.
Please make sure you are using the correct MJ Splitter model with the appropriate saw blade.
