

The new LulzBot TAZ Pro is an industrial desktop 3D printer that provides large, multi-material and soluble support printing with LulzBot’s award-winning reliability. Create large functional prototypes, manufacturing aids, and print-on-demand parts with easy, professional results.
Tool Head: TAZ Pro Dual Extruder, 2x E3D 0.50mm nozzle
Layer Resolution: 0.05 mm - 0.4 mm (0.002" - 0.02")
Max Hot End Temperature: 290°C
Print Surface: Borosilicate Glass/PEI
Max Print Surface Temperature: 120°C
Leveling: Automatic Z-Axis Compensation
Calibration: Automatic X/Y/Z Offset Calibration
Certifications: FCC, CE, WEEE, ETL by Intertek (UL), CA, CSA, RCM, OSHWA
Print Technology: Fused Filament Fabrication
Print Volume Dimensions: 280 mm x 280 mm x 285 mm (11.02" x 11.02" x 11.22")
Print Volume: 22,344 cm³ (1,362.56 in³)
Ambient Operating Temperature: From 5°C to 45°C (41°F to 113°F)
Operating Footprint: 83.2 cm x 71 cm x 52 cm (32.76" x 28" x 20.47")
Maximum Travel Speed: 200 mm/sec
Leveling: Automatic Compensation
Calibration: Automatic X/Y/Z offset calibration
Connectivity: USB Serial or SD Card with Included 4gb flash drive
Included Tool Head: TAZ Pro Dual Extruder
Extruder/Hot End: 2x E3D Titan Aero
Nozzle Diameter: 0.50 mm
Nozzle Material: Hardened Steel
Nozzle Temperature: Up to 290°C (554°F)
Nozzle Heatup Time: From 18°C to 100°C (64°F to 212°F) in 10 minutes, 45 seconds
Print Surface: Modular Heated Borosilicate Glass/PEI
Maximum Print Bed Temperature: Up to 120°C (248°F)
Print Bed Heat Up Time: From 18°C to 230°C (64°F to 446°F) in 1 minute, 36 seconds
Layer Resolution: 0.05mm-0.4mm (0.002"-0.015")
Minimum Positive Feature Size: 0.5 mm (0.02")
Calculated XYZ positional resolution: 10, 10, <1 micron
Filament Diameter: 2.85 mm
Supported Materials: Open filament system compatible with PLA, ABS, Nylon, Polycarbonate, Carbon Fiber Reinforced Blends, TPU 85A & 95A (Flexible), PETG, PETT, Copolyester, PVB (Polycast), PVA, HIPS, and many more 3rd party filaments.
Unit Weight: 16.78 kg (37 lbs.) without filament spool
Dimensions with 1kg Filament Spool: 83 cm x 71 cm x 52 cm (32.67" x 28" x 20.47")
Operating System Compatibility: GNU/Linux, Mac, Windows
Recommended Software: Cura LulzBot Edition Version 3.2 or newer
Firmware: Marlin
Supported File Types: .stl, .obj, .x3d, .3mf, .png, .jpg
Power Requirements: 100VAC-240VAC, 50Hz-60Hz, 3.2A max
Output: 24VDC, 500 watts, 21 amps
Power Supply: PMC-24V150W1AA
Power Cable: IEC cord, C13 to region-specific connector
Includes
3mm Filament sold separately.