JET 6-Speed Air Filtration System

Description

Improved design and added technology make this air filtration system a must-have in any shop classroom. It automatically detects dust levels and can adjust fan speed accordingly. The filter life is also monitored and displayed on the tilted LED display panel. ABS injection molded body makes the unit lighter and less prone to damage while dampening vibration and noise. Bright LED display shows filter life, speed, and timer settings. A radio frequency remote allows you to change speed and set the timer, up to 16 hours, from anywhere in the shop.

• Captures particles down to 1 micron
• Two-filter system with air diffuser disperses air into a broader pattern
• LED notification of filter life updated by sensor
• Quiet and efficient BLDC motor

Motor type: BLDC (Brushless Direct Current Motor)
Horsepower: 1/3
Phase: 3
Voltage: 120V input, single phase only
Frequency: 60Hz
Listed FLA (full load amps): 3.8
Motor speed range: 600 - 1,100 RPM
Power cord: SJT 18 AWG x 3C, 6'
Power plug: American Type NEMA (10A/125V)
Overload protector: 5A

Air flow without filter (CFM):
Speed 1: 450 ±10% @ 51dB
Speed 2: 560 ±10% 56dB
Speed 3: 670 ±10% 60dB
Speed 4: 780 ±10% 63dB
Speed 5: 890 ±10% 66dB
Speed 6: 1000 ±10% @ 67dB

On/off switch: Rocker switch
Speed control: 6 selectable speeds
Timer Setting (Hour): 1 - 16 (LED display)
Display: LED module
Remote Control Transmitter: Radio Frequency
Battery: CR2032
Outer Filter (stock # 708731): 5 Micron Replacement Electrostatic Out Filter
Inner Filter (stock # 708733): 1 Micron Replacement Inner Filter
Overall Dimensions: 30-1/8"L x 24-1/4"W x 15-3/8"H
Weight: 33 lbs.

Includes
Remote Control
CR2032 Battery
Manual and Warranty Card
4 Eye Bolts

Resources