JET 13" Lathe w/Stand

Description

Due to special pricing available exclusively to our school customers, this item is not available for purchase to our non-school customers at the price listed. Every effort will be made to sell this item at the lowest available price to our non-school customers. Please call us at (800) 831-5904 or email us at web@midwesttechnology.com.

Spindle is precision-ground for accuracy and supported by high quality tapered roller bearings. Headstock is constantly oiled during operation. Enclosed gearbox gives large threading and feed capabilities with no gear changes. Precision roller bearings support the hardened and ground spindle resulting in tight tolerances as well as fast and easy speed changes.

• 6" 3-jaw direct mount chuck with top reversing jaw
• Compound and cross slide have backlash elimination
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Gearbox gives wide inch threading and feed capabilities with no gear changes
• Hardened and ground gears are featured in the headstock and gearbox
• Independent lead screw and feed rod
• Spindle actuation control is apron mounted
• Tailstock may be offset for turning taper

Motor (HP) 2 HP, 230V, 1Ph
Size 13 x 40
Swing over bed 13"
Number of spindle speeds 8
Swing over cross slide 7-25/32"
Swing through gap 18-3/4"
Length of gap 8"
Spindle bore 1-3/8"
Spindle mount D1-4
Range of spindle speeds 70 - 2,000 RPM
Spindle taper with sleeve MT-5 (MT-3)
Number of longitudinal and cross feed rates 40
Range of longitudinal feeds (IPR) .0018 - .0374
Range of cross feeds (IPR) .0006 - .0130
Number of inch threads 38
Range of inch threads (TPI) 3-1/2 - 80
Number of metric threads 23
Range of metric threads .45 - 10
Max tool size 5/8" x 5/8"
Compound slide travel 2-11/16"
Carriage travel 35"
Tailstock spindle travel 3-3/4"
Taper in tailstock spindle MT-3
Steady rest capacity 2-3/4"
Width of bed 7-3/8"
Weight 1,154 lbs.

Includes
stand
2 rests
6" and 8" chucks
12" face plate
3 cam locks
chip tray
splash guard
lifting hook
2 lifting blocks
5 gears
3 metric wrenches
touch-up paint
oil can
metric hex key set
2 shear pins
2 chuck wrenches
tool post wrench
2 MT-3 centers
MT-3 to MT-5 center sleeve
2 screwdrivers
cam lock key
tool box

Resources

• WARNING: This product can expose you to chemicals including lead, cadmium , which is [are] known to the State of California to cause cancer, and lead, cadmium, phthalates, which is [are] known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
•