Hobart AirForce 27i Plasma Cutter

Description

The AirForce® 27i with MVP™ (multi-voltage plug) technology can be used on 120 V or 240 V input power. Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips. Clean cuts 3/8" steel.

• 50% smaller than the previous model so you need less room to store it
• Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components
• Cooling system operates only when needed reducing power consumption and contaminants drawn into the machine
• LVC™ provides peak performance power under variable input voltage conditions (+/- 15%) for steady and cleaner-ending cuts
• Internal gas/air filter and regulator controls amount of usage and flow or air or gas
• LED lights for quick troubleshooting of pressure, power and cup situations
• Postflow cooling circuit extends life of consumables and torch
• Complete cutting capability when powered by an engine- driven welder/generator with 240V receptacle of 4 kW or more

Rated Output
120 V (15 A): 20 A at 88 VDC, 60% duty cycle
120 V (20 A): 27 A at 92 VDC, 35% duty cycle
240 V: 30 A at 92 VDC, 40% duty cycle
Mild Steel Cutting Capacity
Rated: At 20 amps: 1/4" (6.4 mm)
Max. Cut: At 20 amps: 3/8" (9.5 mm)
Rated: At 30 amps: 3/8" (9.5 mm)
Max. Cut: At 30 amps: 5/8" (15.9 mm)
Cutting Amperage Min: 14 A
Cutting Amperage Max: 30 A
Portability: Strap
Size: 5.5"W x 9"H x 13.25"L
Weight: 19 lbs.

Includes
12' XT30R hand-held torch
12' work cable with clamp
10' power cord with 5-15P (120V, 15A) and 6-50P (240V, 50A) MVP™ Plugs
Built-in gas/air filter and regulator
2 tips
Shield deflector
Electrode
Cable management