Festool 8-1/4" TS 75 Track Saw

Description

Capable of cutting material 2-3/4" thick with burn- and splinter-free edges that are clean enough to glue without further prep work. Suitable for cutting solid doors, truing rough lumber, cutting out window frames, and more.

Improve efficiency and accuracy by cutting stacked sheet goods with one cut. When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts. It makes the actual cut right on the edge of the scribe line, even on bevel cuts.

Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade, reducing the chance of kickback, and it retracts into the housing during plunge cuts. The slip clutch also work to minimize risk of kickback as well as wear on the blade, gear case, and motor.

Blade changes are easier and safer with FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal. Variable speed allows you to match the speed of the saw to the material and maintain a consistent speed under load, improving cut performance and protecting the saw’s motor from thermal and current overload.

Power consumption: 1,600W
Power consumption: 13 Amps
No load speed: 1,350 - 4,400 RPM
Angular range: 0 - 45°
Cutting depth: 0"-3"
Cutting depth at 90°: 2-15/16"
Cutting depth at 45°: 2-1/8"
Saw blade diameter: 8-1/4"
Saw blade hole diameter: 1-3/16"
Dust hose dia.: 1-1/16" / 1-7/16"
Weight: 13.6 lbs.

Includes
Systainer
splinter guard
blade
power cord