Baileigh 1006958 Shear/Break/Roll

Description

Due to special pricing available exclusively to our school customers, this item is not available for purchase to our non-school customers at the price listed. Every effort will be made to sell this item at the lowest available price to our non-school customers. Please call us at (800) 831-5904.

This 3-in-1 combo machine saves space for small shops with low production runs and one-off projects. Adjust the camber of the tooling to keep pressure in the middle for a consistent bend across the full width. Press brake portion includes a V die set with corresponding punch die on top for a 90° bend. Movable fingers on the top beam, ranging from 1" to 10-1/8", can make many box sizes. Shear has a spring-loaded hold-down that helps reduce burr on the cut and prevent waste. Hardened and reversible blades stay sharp for longer. Turn the handles 360° to get one full cycle from the slip roll, press brake, or shear. Large handles with grips on both sides allow two operators to combine force and make the machine easier to use. Manual back gauge lets you make repeatable parts without difficulty. Thick steel construction gives structural strength and maintains accuracy.

• 30” working width
• Maximum capacity of 20 gauge mild steel and 16 gauge aluminum
• Slip roll portion has 3 wire grooves
• Forms rolls down to 1.54” in diameter
• Vertical press brake portion bends up to 90°
• Mfr.'s 1-year parts warranty and lifetime technical support by phone

Rolling Capacity: 20 ga.
Shear Capacity: 20 ga.
Min. Rolling Dia: 1.54"
Bed Width: 30"
Bending Capacity: 20 ga.
Max. Bend Angle: 90°
Power: Manual
Finger Lengths: 1", 2-1/8", 3-1/8", 6", 8", 10-1/8"
Finger Thickness: 1/4"
Shipping Dimensions: 40" x 18" x 28"
Shipping Weight: 340 lbs.

Resources